About Global Lift Used Forklifts Vermont
Global Lift Vermont - A forklift purchase is not to be taken lightly. A forklift is a large capital expenditure, and a complex equipment with a motor strong enough to perform heavy-lifting jobs. The price tag for a forklift ranges from ten thousand dollars to thirty thousand dollars, comparable to the cost of a small truck. If buying a second-hand forklift, be sure to have it checked for possible mechanical issues.
There are two different kinds of forklift motor: internal combustion or electric. Forklifts with electric motors are usually more expensive compared to forklifts with internal combustion motors. The size of the motor should suit the type of work for which the forklift will be used. A forklift with a motor that is large costs a lot more compared to one with a smaller motor.
Gasoline or propane powered motors are normally stronger compared to electric motor and are capable of lifting heavier weight. The disadvantage is that gas motors tend to develop issues more frequently compared to electric motors. Depending on the price of propane or gas, gas powered forklifts can be more costly to operate compared to electric powered forklifts.
Reputable forklift manufacturers include Mitsubishi Caterpillar, Crown Equipment Corp., Toyota Industries and NACCO Industries. Prior to making a decision, research the different manufacturers and the availability of parts. Reviews, testimonials and prices could be found on-line.
In the United States, twenty thousand people are hurt each year in accidents connected to the utilization of forklifts. And each year roughly one hundred deaths are caused by forklift accidents. Fortunately, correct training concerning maintenance and operation procedures can considerably lessen the risk of accidents. The basic safety regulations and suggestions below should be followed when using a forklift.
The employer is responsible for making certain that employees are qualified to use a forklift and have gone through a correct training program. Training involves a combination of presentations, lectures, practical hands-on training and discussions. Reevaluation should occur every three years. Operators of forklifts should be up-to-date with current forklift safety regulations. Forklift training program content covers dangers of forklift operations, general workplace hazards, dangers related to utilizing the specific forklift that the employee will be utilizing and workplace lighting and surfaces. An employee should be at least eighteen years old to use a forklift.
Forklift inspections must be done daily in order to ensure the safe and proper functioning of the equipment. The inspection includes keeping a checklist of things and reporting any concerns right away.
Safe use of a forklift involves a safe and clean workplace. A safe work site means establishing "traffic lanes" which are only designated for forklift use. Warning systems like flashing lights and horns should be in place to be able to indicate when there is a forklift approaching. Forklift docking stations should be inspected on a daily basis and kept in good repair.
Included in the general safety guidelines of using a forklift are respecting the forklift load capacity and never going over the maximum; avoiding known hazards on the ground, such as wet spots or oil spills; lowering or raising the load only when the forklift is stationary; making sure that there is enough clearance for the load; and keeping arms, legs and hands in the vehicle during operation.
Powered lift trucks referred to as forklifts are used in almost every industry to move heavy items and supplies. The forklift is a very tough and reliable equipment that has become essential tools in numerous warehouse and construction environments. Forklift units differ depending on the type of fuel that is utilized to power the lift truck and the type of work environment.
Electric powered lift trucks are best for indoor environments, or in sites with limited ventilation because they make no exhaust fumes. They are designed with industrial strength batteries. As the electric forklift batteries require charging, the worksite would need a charging station. The batteries are durable and could be re-charged up to one thousand five hundred times before they have to be replaced. The charging station should be located in a ventilated area and include an emergency eyewash station and an acid spill kit.
Forklifts powered by liquid propane have several advantages over diesel and electric powered machinery making them quite common in warehouse and industrial settings. Propane engines are a lot cleaner than diesel-powered units. There is no down time needed to recharge an industrial battery, and the cost for propane is less than the cost of electricity. A forklift propane tank could be quickly and easily refueled by changing out the empty tank with a full tank. Normally an off-site supplier refills the empty tank, making refueling really safe and efficient.
Diesel and gasoline forklifts are the machinery of choice for outdoor applications and rough terrain. They are usually found on lumber yards and construction sites. Their disadvantages include relatively high fuel costs, relatively high maintenance needs and odorous exhaust. Their advantages comprise a longer lifespan than other units and reliability in tough conditions. Gasoline and diesel units must be refueled at a supply station on site that meets safety and health regulations.
Contact Info
Fax: 1-888-029-0202
Questions or Comments
